Contents and application rate Induline GW-310
The application rate is depending on the porosity of the wood and based on an average of 200ml/m2 per layer. Remmers recommends applying 2 layers of Inducline GW-310 for optimal protection.
Property profile Induline GW-310
- Ready to apply by dipping, low pressure spraying or applying with a roller/brush
- Excellent flow characteristics on untreated wood
- Outstanding (wet) adhesion
- Protects wood from moisture and provides effective protection against blue stain fungi
- Reduces the risk of rot when used in conjunction with constructive wood protection measures
- Increased solids content provides protection against nesting wasps
- Protective film against mould and algae
- Water-based: does not give off any unpleasant odours and tools can be cleaned with water
- Quick drying: 2 coats can be applied in one day
- Long-term protection with uniform weathering
Application Induline GW-310
- For use on exterior wood
- Wood which is not in ground contact, in accordance with DIN EN 335-1, use classes 2 and 3
- Dimensionally stable wood building elements (when used as a primer only): e.g. windows and doors
- Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
- Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
- Primer, intermediate and finishing coats
Directions for application
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Dimensionally stable wood building elements: wood moisture content 11-18%
